Item code: 4-8-7

MEMOTIX
WHITEBOARD PAINT
Two-component enamel designed to obtain a finish that can be used as a whiteboard for markers on any surface. The special formulation allows you to remove signs of markers even after a long time. It can be applied on masonry, metal, alloys and galvanized sheet metal, wood, plastic (excluding PE and PPE), ceramic, glass surfaces.
Available formats: 750 ml*
* Contenuto netto del Kit \/ Net Kit Contents: 500 ml (A) + 250 ml (B) = 750 ml

DESCRIPTION
Two-component enamel designed to obtain on any surface a finish that can be used as a blackboard for felt-tip pens. The special formulation, allows the removal of marker marks even after some time.
MAIN FEATURES
- Excellent adhesion on every surface - Extreme hardness - Can be transcribed with blackboard markers - Easily cleaned - Excellent white point - Excellent brilliance
USE
Applicable on masonry surfaces, metal (iron appropriately treated with anti-rust) alloys and galvanized sheet, wood, plastic (excluding PE and PPE), ceramic, glass. Great to make a surface writable, to give high cleanability and chemical resistance. Indoor and outdoor use.
APPLICATION
The surface to be coated with MEMOTIX must be prepared with a suitable treatment, namely: ON NEW SUPPORTS: for a better anchorage and for a longer duration in time, the surface must be free of - smears that will be consolidated with fixative, - greasiness or grease that will be removed with soap water or washing diluent, - rust that will be eliminated with abrasivation. For particularly smooth surfaces, improve adhesion with light sanding. Apply one or more coats of product at a distance of at least 24 hours from each other, INTERVALED BY A LIGHT SANDING. ON PAINTED SURFACES: if the pre-existing paint layer does not recommend complete removal, ensure that the surface is free from - smears that will be consolidated with fixative, - greasiness or grease that will be removed with soap water or washing diluent, - rust that will be eliminated with abrasivation. If the existing paints are in the phase of detachment, brush and sand these parts thoroughly, or proceed with the paint stripping with paint stripper. Wash with washing diluent, or with soap and water, then apply one or more coats of product at a minimum distance of 24 hours from each other, INTERVALED BY A LIGHT SANDING. Recommended applications: brush, roller, immersion, spray, airless. Environmental and support conditions: The substrate must be dry, free of dust, grease and any other pollutant

• Share: