Item code: 4-8-8

GLOSS BRILLTIX
The shiny enamel is used both indoors and outdoors, on iron and wood. Characterized by high elasticity and high strength even under difficult as urban environments and close to the sea where smog, wear and corrosion are particularly aggressive. For these reasons it can be used on wooden ships and iron. With excellent gloss and coverage. The great expansion gives an aspect uniform and compact. The thickness increases the protection of the media over time.




Available formats: 2500 ml – 750 ml – 500 ml – 375 ml – 125 ml

DESCRIPTION
The glossy glaze is used both indoors and outdoors, on iron and wood. Characterized by high elasticity and high resistance even in difficult conditions such as urban environments and near the sea where smog, wear and corrosion are particularly aggressive. For these reasons it can be used on wooden and iron boats (dead work). Equipped with excellent brightness and coverage. The excellent expansion gives a uniform and compact appearance. The high thickness increases the protection of the supports over time. The satin version is used both indoors and outdoors, on iron, wood and walls, and is characterized by high elasticity and high resistance to yellowing. Equipped with excellent coverage and a velvety final appearance. The excellent expansion, gives a uniform and compact appearance. Ideal for opaque lacquering, furniture and wooden frames. The micaceous type reproduces a final effect typical of the ferrobattuto, with a smooth and satin finish, with marked anti-scratch, anti-dust and anti-rust characteristics. The excellent expansion gives a uniform and compact appearance. The high thickness increases the protection of the supports over time.

MAIN FEATURES
- Excellent coverage. - High resistence. - Anticorrosive.
USE
Iron, alloys and galvanizing before anchoring, wood, masonry, plastic (excluding PE, PVC and PPE). It can be applied on products destined for exposure in urban, rural, coastal and industrial environments of medium aggressiveness. It can be coated with synthetic solvent or water based enamels.
APPLICATION
The surface to be painted must be prepared with suitable treatment, namely: ON NEW IRON SUPPORTS: for a better anchorage and for a longer life in time, the surface must be sanded, eliminating rust, especially the detaching one. It is necessary to degrease with water and soap or washing diluent, eventually forming a calamine. Apply one or more coats of product at a distance of at least 12 hours from each other. ON NEW SUPPORTS IN ALLOYS AND GALVANIZED: suitable anchoring primer is recommended. ON PAINTED SURFACES: if the pre-existing paint layer does not recommend complete removal, degrease with water and detergent, rinse. If the existing paints are in the process of detachment, brush \/ sand thoroughly, especially the parts affected by the detaching rust or proceed with the paint stripping with paint stripper. Wash with washing diluent, or with water and soap, then apply an anchoring primer if it is alloys or galvanized and then one or more coats of product at a distance of at least 12 hours from each other.

• Share: