STRUCTURA HI-TECH is a new decorative product of the DELUXE COLLECTION SERIES.
STRUCTURA HI-TECH is the revolutionary new decorative effect that creates pearlescent yet rustic structured textures, deeply ridged.
STRUCTURA HI TECH has thermal insulation properties. The product can be applied only on internal supports, after suitable treatment with our special DECOR FONDO.
STRUCTURA HI TECH can be applied in countless ways. On the color chart only 3 main effects are presented:
RIGATO (RIDGED) EFFECT
- Washable,Environmentally friendly- Can be applied on: Walls,Wood- forInteriors use
STRUCTURA HI -TECH should be applied on the DECOR FONDO primer. Make sure the surface is completely dry . If the surface is plastered, make sure it had a curing time of at least 28 days , depending on temperature. Make sure that the media has been well prepared and is suitable for coating: plaster must be dry, not have any granules , on old walls, make sure that there is no poor quality or powdery paint, remove flaking paint etc. After making sure you have made suitable support , proceed as follows : APPLICATION ON WALLS: : - Apply 1 coat of SCIK PURAL ACRIL or FISSATIVO TRE STELLE primer if necessary. -Apply with a brush or roller one or two coats of DECOR FONDO PRIMER diluted with 5-10 % water. DAMASCO EFFECT: - Apply STRUCTURA HI TECH evenly using a stainless steel trowel, and immediately after, using the same tool, dab on the applied product. - Immediately smooth horizontally the ridges which were created from the dabbing of the product. - Allow to dry thoroughly . RIGATO (Ridged) EFFECT : - Apply STRUCTURA HI TECH evenly with a stainless steel trowel and once applied scratch the product with the FRATTONE RIGATO special tool. - Immediately smooth the ridges created by the scratching of the product using the SPATOLA TD. - Allow to dry thoroughly . VORTEX EFFECT: - Apply STRUCTURA HI TECH evenly with a stainless steel trowel and once applied scratch the product with the FRATTONE RIGATO special tool. - Immediately after, turn the FRATTONE RIGATO special tool about its axis to create circular ridged patterns, then smooth the ridges using the SPATULA TD. - Allow to dry thoroughly. -Once the desired effect has dried completely , apply colored STRUCTURA HI TECH FINITURA using a short nap roller evenly. Allow to dry thoroughly . - Using a sponge, apply STRUCTURA HI TECH METALLICO and fade gently.
4LT : 3-4 m²15LT : 12-13 m²